putyourmittenson
Well-Known Member
Hi all.
Today i planned to code a new key to my A2 as i only got it with 1.
I have the SKC code and id48 chip (courtesy of Birchall) and a housing with a freshly cut blade.
I followed this Rosstech procedure;http://www.ross-tech.com/vag-com/cars/Immo3-key-matching.html
However the 2nd key only worked once afterwards but not anymore and now the original key whilst still working normally has a fault which means the orange key and car symbol constantly flashes.
Is there anybody out there that understands the issue here?
Regards, M
Today i planned to code a new key to my A2 as i only got it with 1.
I have the SKC code and id48 chip (courtesy of Birchall) and a housing with a freshly cut blade.
I followed this Rosstech procedure;http://www.ross-tech.com/vag-com/cars/Immo3-key-matching.html
However the 2nd key only worked once afterwards but not anymore and now the original key whilst still working normally has a fault which means the orange key and car symbol constantly flashes.
Is there anybody out there that understands the issue here?
Regards, M