greywolfhound
Member
Had some great fun making up all these different boxes et cetera for a French cleat storage system I’ve made up three boards on the walls one for the lathe section of the workshop one for the mechanical side and one for the woodwork side just finish the woodwork side one first..made using 18mm birch ply finished with a flooring wax/oil ..The possibilities are endless I highly recommend it ..I had a load of maple strips you just run a 45° angle on the wall strips ..and glue the reverse onto your box;s and they sit there nicely move them where you want that’s the beauty of a system.. I bought a Makita air pin gun I used stainless pins made it so much easier assembling the boxes glue and pin ..
Last edited: