Birchall
Dick Chown Award 2016
Ok thanks because i unplugged it and it stayed on so the problem could still be the pad side of the wiring
Sent from my SM-J510FN using Tapatalk
The wiring loom for this is a known weak spot and so Audi stock a repair loom kit at around £54.
The wires tend to break where they go through into the engine compartment.
So it could well be that is what has happened to yours.
Some people just connect the two wires together and that disables the warning, you should be inspecting your brake pads regularly anyway, so the lack of a warning is not an issue if you maintain your car well.
Steve B