A2 Comfortm and alarm codes

A2Spain

A2Spain

Member
Hello,

I am looking for the A2 comfort codes, close doors when speed are aprox. 25 km/h and the alarm code for beep when close the car.

Anyone can help me?

Many thanks

Jorge
 
These vary from car to car.

To assist you, I'll need to know the current code stored in the convenience module (46).

Cheers,

Mike
 
Hi Mike,

Many thanks for your interest. Now I have a new problem:confused:, I can access to A2 ECU with my vag, seems a bit rate speed problem.
I use this vag on my TT without any problem.

On OPTIONS I have 0 (zero) on Start Baud, 30 on KW2 Delay, -1 on TST address, 55 on BLK int, 1 on char Int and 25 on KP2 time.
Is it correct for the A2 Ecu? Must I change something?

Thanks a lot.

Cheers

Jorge
A2Spain
 
Hello again Mike,

On module 46 I have 06730 on software coding and 02138 on workshop code.

Thanks

Jorge
 
Ah, now you're asking!

As I have a full HEX+CAN interface, I've never had a need to change or play with the baud settings.

It's not the ECU you need to be accessing either, it is module 46 - central convenience unit. When you get into the module, just let me know the current coding and I'll sort you out.

Cheers,

Mike
 
As our last posts crossed in cyberspace, here is the code you need:

07786 (You need to enter ALL the digits, DO NOT miss out the '0')

Keep the workshop code the same.

WARNING TO ANY OTHER OWNER!!!

The above figure is ONLY valid for this particular A2, do not try it on your own, as you'll probably **** things up, big time!!

Cheers,

Mike
 
Last edited:
Do it ! !

Many thanks Mike for your help;) Comfort module and beep when closed running perfectly.

Cheers

Jorge
A2Spain
 
Hi, what is a beep when you close the doors?

I may add that to the to-do list. (lock doors auto above a speed) too mike..
 
Hello,

Beep sound from rear alarm siren when doors are closed, It helps to confirm that it has been closed correctly.

Cheers
 
You must log in or register to reply here.
Back
Top