"New" yaw sensor arrives tomorrow - what now?

Ken Long

Ken Long

Member
Following on from this thread I ordered a yaw sensor from Ebay. It turns up tomorrow so, time/weather/misc permitting I'll aim to get it fitted pronto.

The big question is "how?"

Am I right in thinking that I can get to it from the passenger foot well? Remove the screw cover on the centre console, unscrew the revealed screw and gently shimmy the panel off? Unbolt the old sensor (which will be where?), bolt on the new one and reassemble. I assume clear the error codes on VCDS after that?

Anything to watch out for? Reluctant side panel? Awkward bolts etc? All pointers gratefully received!
 

ESP and ABS fault lights - Yaw rate sensor

Hi, on my bro's A2 he has a fault code as follows and ESP and ABS lights are lit on the dash. 01542 - Yaw rate sensor (G202) 57-00 electric circuit failure So my query is where is this sensor located on the A2? ( its the 1.4 petrol if it makes any difference). No google result on its...
www.a2oc.net www.a2oc.net
 
How do I disconnect the connectors to the sensor? I'm in a stress position in the passenger footwell!
 
And how do I get the sensor out of the housing?
2024-03-0715.29.469137804846687719445.jpg
 
push down the tabs on the plug and pull , once disconnected you will have a screw which removes the plastic cover then two nuts .
 
You must log in or register to reply here.
Back
Top