Club Stickers

[Jaffa]

Hi folks,

I've posted a couple of times many months ago regarding floppy wipers, I think. Result: I now have floppy wiper on my 2001 SE 1.4. [8D]
So thanks for the shared knowledge on that.
Next, I finally did the decent thing and joined the club. Cool. The sticker is already in pride of place (strangely in the same location as Stuart's picture - are we both safety conscious or sensible?).
Now, the question is....the sticker appears to be in three pieces - a white obviously removable backing, a transparent piece of the sticker with the print on it and a final backing piece of white plastic. So should the white backing be removed in any circumstances? I guessed before I saw the picture in the above thread that it might be designed to be transparent apart from the design itself, but as I tried to peel it away, it didn't feel quite right.

So, Stu or someone else, put me out of my misery - are you meant to do this under any circumstances, or not?

Thanks for any responses.

James

[shezlee]

The purpose of the white backing is so others can read the sticker we have looked at transparent one and the information gets lost, the only bit that should be removed is as you say the obvious bit.

Lee and Sheridan,
TDI SE, Build 11/01, Dolphin Grey (http://www.audi-a2.co.uk/uk18.htm)
50% Brighter Bulbs : Audi 6 CD Changer (http://www.audi-a2.co.uk/guide1.doc) : Rear drinks holder (http://www.audi-a2.co.uk/guide2.doc) : Floppy Wiper (http://www.audi-a2.co.uk/guide4.doc) : Centre Tray (http://www.audi-a2.co.uk/guide5.doc) : Elasticated Belt System (http://www.audi-a2.co.uk/guide7.doc) : Chrome Numberplate Surround

[Stuart_D]

Hi Jaffa - Just to confirm what Lee has said...only the paper white backing should be removed.

On the subject of stickers - the three layers should not be as obvious as they are, unfortunately the sticker quality is not great and I will not be ordering again from the company I used. But they were good value for a large quantity and I think are sufficient for the time being.

If anyone has a sticker that has started to disintegrate or is very poor quality, then let me know and I'll send you a replacement.

[img=left]http://www.a2forum.net/stuart.gif[/img=left]Stuart Diamond: (mailto:Stuart@Audi-A2.co.uk) A2OC Founder | Forum Administrator

2001 TDi SE: (http://www.audi-a2.co.uk/uk1.htm) Cobalt Blue Metallic | Open Sky Roof | Kenwood Mask CD | Front Centre Armrest | Front Centre Tray

A2OC Website (http://www.audi-a2.co.uk/index1.htm) | A2OC Forum (http://www.a2forum.net/forum/default.asp)

[andrew simmons]

cheers stuart
At the moment the new stickers you sent me (white ones) seem to be good at the moment.

Cheers

Andy Simmons

A.D.Simmons

[Johann]

I prefered the old black stuck-outside sticker!!! (And yes I was the first to ask for an internal sticker so it does not get butchered in the weather/wash)...

The black design was just sooo classy... it was nearly invisible on the tinted glass, and only when you looked close-up you saw the white letters and the red detail... the white one... hmmm... Sorry, but I won't put that on my car! (Sorry Stu...) So please, when these run out, do internal black ones again...

__________________________________________________ __________________________________
[img=left]http://image1ex.villagephotos.com/180225.jpg[/img=left]
2001 A2 TDI SE Crystal Blue with Open Sky, 6CD Symphony II, BOSE upgrade, DIS and HALF a winterpack!

iPAQ 3970 with Sat-Nav sleeve, rear cupholders, luggage net and floppy wiper!

http://www.audi-a2.co.uk/uk23.htm

[Jaffa]

Hi guys,

Thanks for the replies. Now I know. :)

Johann, why not get some made up? While you're at it, I'd also like a 'Mission Aborted' sticker, too.

;)