Any Ideas?????

Ok so my A2 has been throwing up to faults related to ABS

00285 ABS WHEEL SENSOR
FRONT RIGHT (G45)
012 Electrical Fault in circuit

00668 Supply Voltage Terminal 30
008 Implausible Signal


Does this mean i need a new abs sensor?

the code 00668 clears but comes back again. I recently changed the discs and pads and sort of broke the plug that the wire from the pad goes into but glued it back together this was however on the left side not the right.

If you have any ideas that would be great.

It sounds more like a wiring fault, not necessarily a new sensor.

Firstly check all the wiring from the hub as far back as you can - this will be easier if you remove the wheel.

Also, you should check the fuses and then take it from there (the ABS fuse is located in the passenger footwell). The wiring from the sensor is terminated at a connector point at the base of the A pillar and then on to the ABS control unit.

Cheers,

Mike