Concert security code

Status
Not open for further replies.

GrayB

Member
The saga of my CD player continues! Having found a CAN-bus emulator from Germany that enabled me to fit a later Concert player to my pre-CAN-bus car, I have hit another problem :(

When the Concert is switched on, the display shows 'SAFE' as expected, so that the security code can be entered. In the manual, it tells me to press the 'RDS' & 'TP' buttons simultanously. The display should then change to '0000' so that you can enter the code with the buttons below. Unfortunately, my display just continues to show 'SAFE' without changing! [29]

Does anyone have any ideas? Needless to say the vendor of the Concert (on Ebay) is not responding to my emails.....
 
For new generation radios you need to press RDS and SCAN. Not sure when the new generation versions were introduced or what the difference is but it is worth a try.

Regards Spike
 
[24]Well done Spike!

That worked. It seems that the manual in the box with my Concert is for the older version, while the h/u itself is the newer...

Very happy that all the effort has actually worked. [8D]
 
Status
Not open for further replies.
Back
Top