Hey guys!
Bought a little A2 for my wife a couple of weeks ago with 2 known issues (an engine mount and remote locking not working). After a few days I discovered that not only the remote locking was not working, the electric windows and the read doors were working depending on their mood. After a lot of posts read on this forum (thanks to everyone for contributing, you're all great!) it seemed pretty clear that the CCCU was not working.
I had an 8Z0959433N CCCU but could only find a 8Z0959433AF locally. I decided to take a chance since I have a VCDS cable and found a lot of useful info here. So i noted the coding of the old one, replaced it with the new AF and success! The windows and doors work as expected! The issue is that the remote locking still doesnt work I have read all the tutorials I found, surely this beautiful resource as well http://www.a2oc.net/forum/showthread.php?27117-Adding-additional-keys-including-the-new-shape-key but with no success. Even tough everything seems to happen as expected when pairing the key with VCDS, the doors will not react to the remote.
My remote has the series 8z0 837 231 D, so it should be compatible with 8Z0959433AF right?
I've made a video with the process which I am trying with. An important note is that I have only one key, so in the video the half with the key is in ignition turned to ON and the other half with the buttons was in my hand. Only when filming, I noticed that the first 2 values of Meas Blocks with group 007 change when I press buttons on the remote.
https://youtu.be/1HTHJB7j0zE
Any pointers on what could it be?? It's very frustrating. Is the key faulty ? Is the new CCCU faulty as well ?
Thanks a lot!
Bought a little A2 for my wife a couple of weeks ago with 2 known issues (an engine mount and remote locking not working). After a few days I discovered that not only the remote locking was not working, the electric windows and the read doors were working depending on their mood. After a lot of posts read on this forum (thanks to everyone for contributing, you're all great!) it seemed pretty clear that the CCCU was not working.
I had an 8Z0959433N CCCU but could only find a 8Z0959433AF locally. I decided to take a chance since I have a VCDS cable and found a lot of useful info here. So i noted the coding of the old one, replaced it with the new AF and success! The windows and doors work as expected! The issue is that the remote locking still doesnt work I have read all the tutorials I found, surely this beautiful resource as well http://www.a2oc.net/forum/showthread.php?27117-Adding-additional-keys-including-the-new-shape-key but with no success. Even tough everything seems to happen as expected when pairing the key with VCDS, the doors will not react to the remote.
My remote has the series 8z0 837 231 D, so it should be compatible with 8Z0959433AF right?
I've made a video with the process which I am trying with. An important note is that I have only one key, so in the video the half with the key is in ignition turned to ON and the other half with the buttons was in my hand. Only when filming, I noticed that the first 2 values of Meas Blocks with group 007 change when I press buttons on the remote.
https://youtu.be/1HTHJB7j0zE
Any pointers on what could it be?? It's very frustrating. Is the key faulty ? Is the new CCCU faulty as well ?
Thanks a lot!