AudA2Numpty
A2OC Donor
So I buy an A2 two days ago in a very poor cosmetic condition.
Driving it revealed a rattle the drop links and suspension are solid.
Looking underneath revealed the undertray hanging off so after 2 hours of removing the final rusted worn nut and a 10mm socket head which pinged off and hit me in the forehead the undertray was off.
Sadly it was too late and too dark for me to see anything under the engine bay last night so this morning I had a slightly better look.
I found two things I found the rattle which appears to be the driveshaft shield which is quite loose and possibly missing a part?
I also found that the right drive shaft cv boot (inside by the shield) is possibly missing a clamp because there is grease splattered everywhere from it. Not sure if I have to replace the driveshaft or just secure the boot with a clamp?
Any help would be appreciated.
Driving it revealed a rattle the drop links and suspension are solid.
Looking underneath revealed the undertray hanging off so after 2 hours of removing the final rusted worn nut and a 10mm socket head which pinged off and hit me in the forehead the undertray was off.
Sadly it was too late and too dark for me to see anything under the engine bay last night so this morning I had a slightly better look.
I found two things I found the rattle which appears to be the driveshaft shield which is quite loose and possibly missing a part?
I also found that the right drive shaft cv boot (inside by the shield) is possibly missing a clamp because there is grease splattered everywhere from it. Not sure if I have to replace the driveshaft or just secure the boot with a clamp?
Any help would be appreciated.