I'm sure standard and OSS head linings are the same overall size. Can't find any 'how to' guides specifically on it's removal but this post links to loads of 'roof' photos which may help - http://www.a2oc.net/forum/showthread.php?26437-Roof-skin&p=210027#post210027
Cheers Spike
Many thanks for the responses. I was just wondering how big a car I'd need to get one home in. A rough length/width will do for my needs. I appreciate the lining for a 'solid' or OSS roof are going to be the same size overall but I thought OSS may make removal of the headlining more complex.
I haven't got an A2 (yet!) so getting hold of this sort of info is a bit tricky for me.
A bit of an odd question, but: Can anyone tell me how big the A2 roof lining is and how easy is it to remove from a car with OSS?
There's a cover over the assembly which needs levering off to reveal the T20 screw that holds the clip in. No, D pillar trim needs removing to get the roof out. See my earlier reply.Guys how do you remove the sunvisor clip from the roof lining I have the visor off but the clip with the metal spring? Also is it possible to remover the roof without dismantling the d Piller?
Correct, but if you remove the front and rear door seals the B pillar trim moves downwards a few mm, just enough to remove the roof lining. This way you don’t have to remove the seat belt anchors.Ok so I assume the a and b pillirs are just clips? But d pillars need all the boot trim removed?