Cup holder jamming?

rippling

Member
Hello.
My cup holders are not popping out i can pull them fine like they need a hand, any suggestions on how to lube them?
 
I would appreciate some advice on this too. Mine's pops out after juddering during a drive lol.

Sent from my Pixel XL using Tapatalk
 
Or take them out and wash them in soapy water that will get rid of the sugary residue.

They are pretty easy to get out.

Steve B

Plus 1 for removal and washing in soapy water
To do so remove the radio
remove the two X head screws that hold the centre vent assy in place
pull out the centre vent
disconnect the hazard light switch cable
the cup holder as a clip on each side, these need to be pressed together to allow the cup holder to be pulled free of the centre vent

Then give them a good scrub in some hot soapy water and use an old tooth brush to get them clean
allow to dry out and then apply a little WD40 to act as a lubricant

I have made a good one out of two broken ones before now, they do come apart with a little effort

cheers,
 
So whats wrong with using the WIFES toothbrush....I do when I get dog ****e on my boots..........................ummmm, I am now wondering if that is why the wife's breath smells?
 
I used a little graphite powder (which is for lubricating locks). It's dry, doesn't smell and, as a side benefit, everything in a small radius becomes glittery when you inevitably overdo it! Shiny!


Sent from my iPhone using Tapatalk
 
Back
Top