Guide to removing the front bumper?

Mbzpar

Member
Sorry folks, tried searching the website manually, via the search and via a google search to find some kind of guide on how to remove the front bumper. Does anyone have a idiot proof guide by chance or better still a video they could share? Much appreciated Paul
 
Front bumper isn't too bad to remove at all.

Remove headlights
Take front wheels off and remove inner wheel arch liners
You will be able to see the torx screws that hold the sides of the bumper in place through the gaps in the front wheel arche. There are 3 screws on each side.
Undo the two torx screws that are hidden by the headlights
Undo the 3 plastic rivets along the top of the front bumper
Undo the 5 or so torx screws that hold the bumper to the undertray
At the highest point of the bumper looking from the inside you will see a little white tab, make sure you push that down while pulling the top out to avoid breakages.
Pull the bumper outwards at the sides while holding the wheel arch in place.

Job done. A bit crude but it will get your bumper off.
 
As I understand it I will need to remove the front bumper to get to the windscreen washer fluid level sensor?
 
 
Back
Top