current flow diagrams

Mark Reilly

Active Member
I'm looking for some knowledge in understanding current flow diagrams , I'm in the middle of doing some retrofitting and at the point of connecting heated washers so far at fusebox fuse 33 then I lose it , so in short the rectangular boxes with numbers in them , in my case 33 , what are the meaning of these numbers as I only have partial diagrams at present and think I'm missing vital info

any advice appreciated
regards mark
 
It is a way of showing wires without drawing across loads of different pages. There is an x-axis with numbers along the bottom of each page defining a location. The number 33 in box means "jump to 33". If the box with 33 in it was at location 10, then when you go to 33 you should see a box with 10 in it. Simples? PM me with an email address if you need pages you're missing. Matt


Sent from my iPhone using Tapatalk
 
thanks spike I have this info already thanks just struggling to follow diagram as I don't have page numbers on the pdfs I have
 
Hi Mark

The related diagm does not add much but here it is -

A2wiring.JPG


Cheers Spike
 
Back
Top