Kevin Bower
New Member
Hi there everybody, this is my first post on this site. This weekend I am going to remove my dashboard to change the dreaded evaporator temp switch G263. Ive looked through as many posts as I can find on here re the dash removal and they are all really helpful. I cant see a problem really, taken note of steering sensor, hazard button wire, air bag static etc. The only problem I have is that on one of the posts, it tells me that the only special tools I will need is a M20 star key to remove the steering wheel. I know that a star key is the same as a torx key just differnet name, hood bonnet etc but for the life of me, I cant find a M20 star or torx key anywhere. Ive looked on ebay, Ive even spoken to my local none Audi garage who tells me that they dont have a torx key/ socket that big.
Two question,
1. is the steering wheel held on by a torx nut or a torx bolt where the key fits inserts into the centre of the bolt?
2. If it is the latter, where do I get the tool needed to undo it.
Thanks everyone. I will take pictures of the removal as I do it.
Kevin Bower
Two question,
1. is the steering wheel held on by a torx nut or a torx bolt where the key fits inserts into the centre of the bolt?
2. If it is the latter, where do I get the tool needed to undo it.
Thanks everyone. I will take pictures of the removal as I do it.
Kevin Bower
Last edited: