Birchall
Dick Chown Award 2016
HI,
To recap,
I have managed to get hold of a later model key fob and it is the part number that was recommended as one that pairs to the "AF" CCCU. it is a 8E0 837 220 K and I bought two of them and neither will work
My CCCU will simply not "recognise" the later model key.
Just to clarify that I am certainly well aware of the VCDS function for this because I have successfully coded a secondhand A2 style key to this very AF CCCU without problems. Trying from scratch again meant that both A2 style keys were recognised without problems, but the new shape key will not register as "recognised".
So I am stuck with a new shape key now that will start the car (I have matched a new immobiliser chip to the cluster) but not operate the locks remotely.
So any input from any of the "key" experts on here would be appreciated please.
The full thread I started on this subject is here
http://www.a2oc.net/forum/showthrea...ng-problems-Help-please&highlight=programming
But my problem is well hidden amongst the other info on that thread (especially where I try and explain why the standard Audi programming instructions from Ross Tech don't work the same on the A2.)
Thank you
Steve B
To recap,
I have managed to get hold of a later model key fob and it is the part number that was recommended as one that pairs to the "AF" CCCU. it is a 8E0 837 220 K and I bought two of them and neither will work
My CCCU will simply not "recognise" the later model key.
Just to clarify that I am certainly well aware of the VCDS function for this because I have successfully coded a secondhand A2 style key to this very AF CCCU without problems. Trying from scratch again meant that both A2 style keys were recognised without problems, but the new shape key will not register as "recognised".
So I am stuck with a new shape key now that will start the car (I have matched a new immobiliser chip to the cluster) but not operate the locks remotely.
So any input from any of the "key" experts on here would be appreciated please.
The full thread I started on this subject is here
http://www.a2oc.net/forum/showthrea...ng-problems-Help-please&highlight=programming
But my problem is well hidden amongst the other info on that thread (especially where I try and explain why the standard Audi programming instructions from Ross Tech don't work the same on the A2.)
Thank you
Steve B
Last edited: