Hi andy in the image you see pink that is the antifreeze flowing out of a small hole not sure if its some sort of breather or something broke it was getting dark so i will check again in the day?I assume you stressed the pipe when doing the cambelt. I not 100% orientated in your picture but is that the coolant pipe from the top of the radiator to the thermostat housing? If so it is item 11 in...
coolant pump; coolant cooling system Audi A2 (A2) 2003 year Audi EUROPA 121040
coolant pump<br/>coolant cooling system Audi A2 (A2) 2003 year Audi EUROPA 121040 spare partsaudi.7zap.com
It is not exactly clear in the diagram but it is a composite arrangement better seen here ..
Audi A2 1.6 FSi Upper Coolant Hose Pipes 8Z0121101AD (Item #178709)
Manufacturers Part Number: 8Z0 121 101 AD<BR>Donor Car: 2003 Audi A2<BR>Donor Car Engine Size: 1600<BR>Donor Car Exterior Colour: Blue<BR>Donor Car Interior Colour: Blue<BR><br>This part will fit some or all models from the following ranges:<br><br><ul><lstore.prestigemotorservices.co.uk
Best course of action is to buy new from Audi/TPS, part number 8Z0121101AD, but it won't be cheap or you could risk (not advised) used on eBay if available.
Andy
Daytime image think there is a bit broken from the cooling couplingHi andy in the image you see pink that is the antifreeze flowing out of a small hole not sure if its some sort of breather or something broke it was getting dark so i will check again in the day?
Daytime image think there is a bit broken from the cooling coupling
i think i broke it whilst changing the cambelt be the coolant starts pissing out when i turn over the engine? what should connect to that?Isn’t that missing a pipe from the top?
Shouldn’t it look like thsi with a pipe connecting to it?
Sent from my iPhone using Tapatalk
i think i broke it whilst changing the cambelt be the coolant starts pissing out when i turn over the engine? what should connect to that?
It's in the coolant diagram but I have just checked and the diagram is slightly wrong. Start at the small pipe from the top of the coolant tank, trace it down, straight on at the first Y branch, and at the next Y branch, branch left. This then carries on to connect to your sheared off spigot. Should be plain as day just dangling there.What pipe connects to the upper coolant coupler
Must of broke off some how whilst i was jacking up the engine i will have to replace now hard part i need to find one lol.It's in the coolant diagram but I have just checked and the diagram is slightly wrong. Start at the small pipe from the top of the coolant tank, trace it down, straight on at the first Y branch, and at the next Y branch, branch left. This then carries on to connect to your sheared off spigot. Should be plain as day just dangling there.
Andy
No that's separate i noticed a hole in the bottle previous owner used a screw to hold the under tray obviously not realising they screwed right into the screen wash bottle i noticed the leak whilst removing to change the cam belt, and the coupling i must of damaged whilst jacking up the engine changing the belt i only realise the problem while topping up the cooler.On another missing pipe. How do fill up the windscreen water jets bottle, it is clearly missing at the service hatch? White spigot best seen in your first picture or did you simply disconnect to move it out of the way?
Andy
I think A2Steve has a FSI in at the moment for recycling. Suggest you send him a PM if he does not pick up on your other wanted thread, which incidentally should be in Wanted in the forum's Marketplace, do not be surprised if it is moved by a moderator.No that's separate i noticed a hole in the bottle previous owner used a screw to hold the under tray obviously not realising they screwed right into the screen wash bottle i noticed the leak whilst removing to change the cam belt, and the coupling i must of damaged whilst jacking up the engine changing the belt i only realise the problem while topping up the cooler.
Thanks im new to all this so try to ignore.I think A2Steve has a FSI in at the moment for recycling. Suggest you send him a PM if he does not pick up on your other wanted thread, which incidentally should be in Wanted in the forum's Marketplace, do not be surprised if it is moved by a moderator.
Andy
Who how and were is steve?lolThanks im new to all this so try to ignore.
Steve is one of the clubs main A2 recyclers, an ethical breaker who only strips A2's beyond economical repair. Based in South Wales, although most things can be posted, he has helped hundreds of members keep their A2 on the road by providing parts at quite reasonable cost. As I said send him a PM, letter symbol in main menu bar.Who how and were is steve?lol
Edwrai's picture implies that just the elbow with the spigot is available separately, failing that composite affair from Audi/TPS as post #2.
Andy
i did just that lolMmm I’ve recently had dealings with this part, it is all in one with the pipe, it may be removed from the old pipe but using a hack saw as it’s a single ring of metal with no way of getting it off other than to cut it.
Sent from my iPhone using Tapatalk