Well it’s in!!!
It went a lot smoother then I thought it would, the only issue I had was the final washer that sat by the axle bushes, it needed some persuasion.
The only thing I need to do now is to bleed the brakes and fit the wheel arch liners, before I do however I saw this today on the driver side rear inner wing
It’s hanging there and looks like it should be connected to be something.
Looking up inside the arch all I can see is this
It looks like it’s an overflow for the filler neck, however the hose that’s hanging down and the only outlet I can see are the same diameter. Can anyone confirm if that hose does connect to the back of the filler neck.
Back on the headlamps, this is the reason I don’t lacquer the headlamps
The top of the lens has lacquer that’s starting to lift, the bottom of the lens is the same.
The centre of the lens is clear, the lacquer is missing, from experience in the past the heat from the headlights cases the lacquer to fail.
This one will be sanded back and polished during the week, updates to follow
Sent from my iPhone using Tapatalk