PlasticMac
Member
The correlation error, could mean the relative outputs from the two sensors are out of sync, (rather than faulty), making the cam belt fitting a suspect.
The inlet manifold, flaps, actuator and potentiometer needs attention too.
Comms errors could be battery/wiring, so try to eliminate this area first, as it'll impact everything else.
Sorry not to be helpful, good luck.
Mac.
The inlet manifold, flaps, actuator and potentiometer needs attention too.
Comms errors could be battery/wiring, so try to eliminate this area first, as it'll impact everything else.
Sorry not to be helpful, good luck.
Mac.