Bespoke A2 Footrest Group Order 3

Status
Not open for further replies.

2work

Well Known Member
United-Kingdom
Morning all,

Order list is here at Post #2

Ive had a few PMs regards when will the next run of these be starting. So here I am at looking to supply this possible demand. The next order will be for 27 footrests again.

Heres where the idea materialised on the initial Group Order Thread and heres some more light reading from the recent Group Order 2 that was completed around Easter.

Here's a few pictures as a reminder of whats on offer:

LASER cut 3mm Brushed Stainless Steel Footrest for the RHD A2 (All years)

F1CC7F59-4F23-4970-B486-9BD71BFDAE60.jpeg


Fitted in Project OEM against Factory Rubber Mats

02275C2A-244B-4C18-AA7A-A9A7711B5664.jpeg


Fitted against Twist Mats

75E68EEC-2673-4892-A1CB-72CA39395739.jpeg


These brilliant looking footrests are already in some 140 A2s and everyone has had a smile on their face withe the quality of what they have received, these really are a nice item that sits beautifully next to a set to TT Pedal Covers.

As for pricing, it will be exactly the same as the Easter run of these with some options.

Below is the last invoice which Cut-Tec have confirmed is still the price they will charge for 27 Footrests:

386F8AEC-3FB1-4106-99D1-065E662C1998.jpeg


Pricing:
1. £7.00 (£5.83 plus VAT comes to £6.99) for 1 footrest
2. £2.95 postage for up to 4 footrests
3. £1.75 for 2x 30cm strips of genuine 3M UHB double sided foam tape to adhere your footrest (this could reduce as Amazon looks to have a cheaper price right now, but I won't purchase the tape until I know how much I need. 1 roll equals 8x footrests)
4. £0.90 packaging, which includes a padded jiffy bag, printed label and enough tape to ensure its secure
5. £6.50 for 12x 3D Printed infills which I will receive from Paul prior to dispatching you parcel.

To register you interest all you need to do is respond to this thread with the information below.

Interest examples:

@2work 1 footrest with 3M Tape and Infills delivered to mainland UK

@2work 1 footrest without 3M Tape without Infills delivered to mainland UK

@2work 1 footrest with 3M Tape with Infills collected

@2work 1 footrest without 3M Tape without Infills collected

The information you supply will be collated into a spreadsheet which can be amended anytime prior to you paying for what you have shown interest in.

Screen Shot 2021-06-27 at 12.04.51.png


The actual order won't be submitted until I have interest in all 27 footrests, at which pint I'll send out individual PMs to obtain your delivery address along with supplying payment details (PayPal Friend and Family).

Remember this is a no-profit project, you get whats on offer at cost price, my time packaging up and stood in the Local Hermes Drop Off Shop sending them is free.

Any questions please do ask away.

Kind regards,

Tom
 
Updated List as at 14:30 Wed 15 Dec:

List removed as it no longer serves a purpose.

The above list will evolve with response to this thread and will be updated as ofter as possible.

Kind regards,

Tom
 
Hi can I request a footrest . I will go for the infills and tape as well .
Thanks

Sent from my iPhone using Tapatalk
 
Hi can I request a footrest . I will go for the infills and tape as well .
Thanks

Sent from my iPhone using Tapatalk
Morning,

You most certainly can.

I’m about to be away from the Macbook so will add you to the list at Post #2 tomorrow evening.

Kind regards,

Tom
 
Afternoon Simon,

Yes exactly that. Soon as the list gets closer to the minimum order quantity of 27 I will send out individual PM to swap addresses and payment details.

It might take a few months but there has been an influx of new members recently so could be sooner, only time will tell.

Your name is on the list and you will get what you have shown interest in, please do hold out as it will be worth it in the end.

Kind regards,

Tom
 
Morning all,

As we’ve had quite a few new member these last few months I thought it right to mention the Bespoke A2 Footrest again.

For any new members reading this then to get the full details on this venture it starts here.

For those of you who just want to see what's on offer then here is the Bespoke A2 Footrest:
F1CC7F59-4F23-4970-B486-9BD71BFDAE60.jpeg


These are adhered to the A2 standard footrest with 2 30cm lengths of 3M UHB double sided tape.

Here is one with the 3D printed infills fitted into Project (with factory rubber mats:
02275C2A-244B-4C18-AA7A-A9A7711B5664.jpeg


Again in OEM but with the Twist carpets fitted:
75E68EEC-2673-4892-A1CB-72CA39395739.jpeg


The order list is at Post #2, to get your name on said list you simply need to respond to this thread. The minimum order quantity is 27, you'll see below that we have some say to go before I request any funds from you and actually submit th border.

The feedback on these footrests has been awesome and they are now fitted in 140 A2s.

More than happy to answer any questions you may have.

Kind regards,

Tom
 
Only 23 more come on you new or multiple A2 owners, get yer name down on the list


Sent from the future
 
Only 23 more come on you new or multiple A2 owners, get yer name down on the list


Sent from the future
To help out Steve,

I'll add myself to the list. I don't have a 3rd A2 but its probably going to happen at some point. Hopefully I can locate another running MOT’d bargain like Project 250!

Kind regards,

Tom
 
Hi Tom,

May I have 2 x sets please.

Cheers
Paul
Afternoon Paul,

You most certainly can. I’ll update the list later this evening Sir.

Only 20 more footrests available on this third group order.

Kind regards,

Tom
 
Status
Not open for further replies.
Back
Top