Correct coding for 2001 se A2 ccu

[hharry100]

does any one know what the correct coding is for this unit i have: 06859 but i have the following faults occuring which a mechanic says is because of incorrect coding

Address 46: Central Conv. Labels: None
Part No: 8Z0 959 433 Q
Component: Komfortgerát T1D 0614
Coding: 06859
Shop #: WSC 02138
VCID: 54ACC9DD8E93

Part No: 8Z2959802
Component: Tõrsteuer.FS BRM 0001

Part No: 8Z2959801
Component: Tõrsteuer.BF BRM 0001

6 Faults Found:
01370 - Alarm triggered by Interior Monitoring
35-00 - -
01561 - Left Rear Door
59-00 - Can't Unlock
01561 - Left Rear Door
61-00 - Won't De-Safe
01562 - Right Rear Door
59-00 - Can't Unlock
01562 - Right Rear Door
61-00 - Won't De-Safe
00932 - Electric Window Motor; Drivers Side (V147)
35-00 - -



I also have a problem with the drivers window, which is a seperate issue i believe it to be a faulty electric motor which i am looking at replacing, Any help in this matter is appreciated.

 

[Sarge]

The coding looks OK.

I have found these errors do appear on a lot of Convenience Units. Other coding for these units are:

Code 06891 and the one that locks the doors when the car moves, unlocks just drivers door on one press of remote and all doors on two presses of remote, and blips the alarm telling you all locked secure is code 07935.

As for your error 00932, check the fuses, connections/power to motor first, error shows as:




00932 - Electric Window Motor; Drivers Side (V147)

00932 - Electric Window Motor; Drivers Side (V147): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
Window Automatic Run not working
Pinch Protection limited
Possible Causes
Automatic Run & Pinch Protection not adapted
Possible Solutions
Adapt Automatic Run & Pinch Protection (see Special Notes)
Special Notes
Pinch Protection Adaptation
Make sure the window in question is completely closed.
Use the driver door window buttons to operate the window(s).
Roll down the window and keep holding the button down for 2 additional seconds after the window is already fully opened.
Roll up the window and keep holding the button up for 2 additional seconds after the window is already fully closed.
Now test the window automatic.

 

[hharry100]

Thanks for the coding info, i managed to fix the window problem not sure if its permanent but its moving up and like normal, i disconnected the central convenience unit and then reconnected and windows seem to function correctly afterwards.