D
Deleted member 20348
Guest
Hi,
This may have already been shared in the past.
This idea only occurred to me after a good hour or so of puzzling.
I wanted to make sure the stick stayed put to maintain the crank case air seal.
Finally after thinking suitable ways to get around the problem such as bungy ties, hooks and nut and bolt configurations this happened.
There are tabs but they are worn out and won't click in and stay put any more.
I use a cable tie to increase the clamping force of the tab and it worked.
Very pleased with this fix. Only took me six years to work it out.
This may have already been shared in the past.
This idea only occurred to me after a good hour or so of puzzling.
I wanted to make sure the stick stayed put to maintain the crank case air seal.
Finally after thinking suitable ways to get around the problem such as bungy ties, hooks and nut and bolt configurations this happened.
There are tabs but they are worn out and won't click in and stay put any more.
I use a cable tie to increase the clamping force of the tab and it worked.
Very pleased with this fix. Only took me six years to work it out.
Last edited by a moderator: