Linnea Palin
Member
Hi!
I've just had my A2 1.4 petrol -05 be read for error codes and it turned out this:
#16588 - translates to: Cyl 4, injector circuit fail in electrical circuit?
#16586 - translates to: Cyl 2, injector circuit fail in electrical circuit?
#16585 - translates to: Cyl 1, injector circuit fail in electrical circuit?
#16587 - translates to: Cyl 3, injector circuit fail in electrical circuit?
I've had the car for about two weeks and I started to wonder if it had anything to do with something that has happened twice in those two weeks.
First time I was driving on the highway about 90-100 km/h and had been driving for about 20 minutes and changed gears and the car started twitching (almost like if I had stepped on the gas pedal for half a second, then the brakes for half a second, then gas, breaks, gas, breaks)... I thought that since I had just changed gears I must have not put the gear in properly put the gear in neutral, slowed down, then put the gear in again (without stopping) and then the car ran perfectly again.
I didn't think twice about it until this same thing happened again the other day. This time I had driven the car for about an hour, then stopped for maybe 2 hours and it was REALLY cold outside. Must have been something like -10 degrees. The car started perfectly when I was gonna continue the drive, but after driving for a short while, maybe 5 minutes, the stutter/twitching/jerkiness was happening again! I did the same thing as last time, put the gear in neutral, slowed down to a stop and this time I shut the engine off. I started it again and could drive off with no problem.
I've had no other problem with the car, everything runs smoothly.
Now, I ask - is this related to the error codes? I wasn't looking for error codes because of this, I just had the test be done as part of the annual inspection just out of curiosity.
If it's not related, should I try and reset the error codes and then forget about it unless it becomes a problem?
If it is related, what should I be trying first?
I've looked in several other threads here where the same error codes are mentioned, but it seems those are writing about having problems getting the engine to start running? Mine always starts, it's only in the middle of a drive that his happens it seems.
Thanks in advance for your help and sorry if grammar and such is not correct, English is not my first language ;-)
I've just had my A2 1.4 petrol -05 be read for error codes and it turned out this:
#16588 - translates to: Cyl 4, injector circuit fail in electrical circuit?
#16586 - translates to: Cyl 2, injector circuit fail in electrical circuit?
#16585 - translates to: Cyl 1, injector circuit fail in electrical circuit?
#16587 - translates to: Cyl 3, injector circuit fail in electrical circuit?
I've had the car for about two weeks and I started to wonder if it had anything to do with something that has happened twice in those two weeks.
First time I was driving on the highway about 90-100 km/h and had been driving for about 20 minutes and changed gears and the car started twitching (almost like if I had stepped on the gas pedal for half a second, then the brakes for half a second, then gas, breaks, gas, breaks)... I thought that since I had just changed gears I must have not put the gear in properly put the gear in neutral, slowed down, then put the gear in again (without stopping) and then the car ran perfectly again.
I didn't think twice about it until this same thing happened again the other day. This time I had driven the car for about an hour, then stopped for maybe 2 hours and it was REALLY cold outside. Must have been something like -10 degrees. The car started perfectly when I was gonna continue the drive, but after driving for a short while, maybe 5 minutes, the stutter/twitching/jerkiness was happening again! I did the same thing as last time, put the gear in neutral, slowed down to a stop and this time I shut the engine off. I started it again and could drive off with no problem.
I've had no other problem with the car, everything runs smoothly.
Now, I ask - is this related to the error codes? I wasn't looking for error codes because of this, I just had the test be done as part of the annual inspection just out of curiosity.
If it's not related, should I try and reset the error codes and then forget about it unless it becomes a problem?
If it is related, what should I be trying first?
I've looked in several other threads here where the same error codes are mentioned, but it seems those are writing about having problems getting the engine to start running? Mine always starts, it's only in the middle of a drive that his happens it seems.
Thanks in advance for your help and sorry if grammar and such is not correct, English is not my first language ;-)