Fault code 00710-41-10

Gary Woolston

Gary Woolston

Member
Hello all👋
I have a new HVAC error code coming up now,
00710-41-10 defroster flap positioning motor v107?
has anyone had any experience of this?
I had my temperature flap positioning motor replaced the other day, which cured that problem I was getting, now this code keeps coming up, I can't feel anything physically wrong with the heating system, so what would I see if the defrost flap motor was faulty?
Any help gratefully received 😄
Many thanks
Gary
 

Attachments

  • IMG_20230410_183132809.jpg
    IMG_20230410_183132809.jpg
    805.3 KB · Views: 71
There are five similar flap positioning motors in the HVAC unit. The Defroster Flap directs the air flow when you press the screen defrost button.
These flaps are constantly moving to keep the cabin temperature you've set. The hardest working will be the temp flap. But the rarest used, like defrost flap, also suffer for that reason.
Have a search on here for SSP 240, then have a read of the HVAC section.
Mac.
 
Does the defrost flap motor sit in the cradle next to the temperature control flap motor. 🤔
 
Last edited:
PlasticMac said:
There are five similar flap positioning motors in the HVAC unit. The Defroster Flap directs the air flow when you press the screen defrost button.
These flaps are constantly moving to keep the cabin temperature you've set. The hardest working will be the temp flap. But the rarest used, like defrost flap, also suffer for that reason.
Have a search on here for SSP 240, then have a read of the HVAC section.
Mac.
Click to expand...
Thank you Mac👍🏻
 
You must log in or register to reply here.
Back
Top