fitting audi tt front seats

YES YES YES YES YES YES and if you missed that its a YES PLEASE from me :) Sign me up, where can I send the money ha ha
Im interested

Prices please ............... got a pair waiting to be installed..

Sent from my SM-G900F using Tapatalk
i may be interested as well


Well, as there's definitely some interest, I'll try to get a batch done as soon as possible. Though that will still take to the end of march, as I will be traveling a lot. Putting a price on it before I've even made a set, is almost impossible, I need to see how much time it will take and how much material will be used. :)
 
finally fitted my TT heated half leather front seats.
 

Attachments

  • WP_20180505_17_52_59_Pro.jpg
    WP_20180505_17_52_59_Pro.jpg
    920.6 KB · Views: 477
They do look good. I still have a TT seat in the garage but because of the rear seat issue I have held off, hoping for a good A2 set. A2Steve's set is tempting but the cost difference is still an incentive. Are your rear seats still cloth?
 
Last edited:
I have 2 sets of front seats and a set of rear seats too.

At the moment the rears are standard cloth.

looking into removing material from them and recovering with TT trim.

All so looking at fitting the Dash too..
 
Looking good. How did you fit them?
SAME AS ON LINK. Rear inside bolts to the car. outside rear requires a square plate 50mm x 45mm with 4 holes drilled in it. 2 are to bolt the mounting point, other 2 holes are for the runner. 1 bolt and 1 guide pin.

fronts require onlya small bracket made from 80mm long Pease of metal bent in the middle to 80 degree,

seat airbag plugs are the same and just plug in and work.
 
How is the driving position when seated ?
I mean the height (adjustable ?) and seating angle.
Thanks :)
 
the lower back part of the seat is about 3/4 inch higher, seat are much more supportive, I done a 300 mile round trip in them with ease.
 
the lower back part of the seat is about 3/4 inch higher, seat are much more supportive, I done a 300 mile round trip in them with ease.
So you are seated more "horizontal" than on original A2 seats ?
And what about height adjustement ?
 
Btw, if there is interest, I could make a "bolt on kit".

All the adaptors, nuts and bolts you'll need to mount a pair of Audi TT MK1 (and many more seats with the same fittings) directly to your precious A2, within just a few minutes. :) Any takers?
Any update on this? I would be interested too if it's not too late. :)
 
Back
Top