Front wheel hub nut

When the cars left the factory they were fitted with 19mm HEX key nuts. All replacements nuts require a thin walled 12 point 36mm socket.
 
When the cars left the factory they were fitted with 19mm HEX key nuts. All replacements nuts require a thin walled 12 point 36mm socket.
Correction: the 1.2Tdi still uses the hex nut.

RAB
 
Possibly... If the original factory fit nut is still on there no....see my post above. The REPLACEMENT nuts you need to fit should be just fine with that socket you have listed.
 
Possibly... If the original factory fit nut is still on there no....see my post above. The REPLACEMENT nuts you need to fit should be just fine with that socket you have listed.
Cheers AudiFan,

I'll take another look tomorrow and may take a photo to post and double check back here .

Cheers :)
 
Back
Top