I’ve notice to cables hanging right side of my audi A2 engine, quick question from A2oc confirmed they were fuel temperature sender cables that broken off from plug. Thank you a2oc.
I plugin the fault code scanner, its confirms the issue, ( 17571 error)
Re Solder the two wires to old plug cap, used heat shrink and glue to make waterproof it. Sensor only monitor the “Resistance” , so if you swap the cable no matter, no wrong way round(you can solder any cable any wire)
Put back in car and used a cable tie to make sure all securely held.
Erase the old code and run the engine for a while and rescanned. "No more error codes" Happy days! more MPG and smooth engine run.
Thank you A2OC for your guides.
I plugin the fault code scanner, its confirms the issue, ( 17571 error)
Re Solder the two wires to old plug cap, used heat shrink and glue to make waterproof it. Sensor only monitor the “Resistance” , so if you swap the cable no matter, no wrong way round(you can solder any cable any wire)
Put back in car and used a cable tie to make sure all securely held.
Erase the old code and run the engine for a while and rescanned. "No more error codes" Happy days! more MPG and smooth engine run.
Thank you A2OC for your guides.
Last edited: