maersk
Member
Do you know how easy it is to replace the headlight?
Undo two T30 torx bolts and rotate the unit inwards in the vertical plane and this disconnects the locating spigots in the inner wing.
Doddle.
Then you will probably find that the 'seal' on the back of the headlight where the bulbs are accessed does not fit quite right. With it out it is literally a ten minute job to realign the seal and hey presto.....wet lamps disappear.
Photos on the forum with Christmas pressy digi camera.
Amazing stuff this 21st century!
<img src="images/icon_smile_cool.gif" border=0>
Undo two T30 torx bolts and rotate the unit inwards in the vertical plane and this disconnects the locating spigots in the inner wing.
Doddle.
Then you will probably find that the 'seal' on the back of the headlight where the bulbs are accessed does not fit quite right. With it out it is literally a ten minute job to realign the seal and hey presto.....wet lamps disappear.
Photos on the forum with Christmas pressy digi camera.
Amazing stuff this 21st century!
<img src="images/icon_smile_cool.gif" border=0>