Hello! New Owner here, and problems from the off! Please help!!!

Right, just had delivery of a 2nd hand Q CCCU for £46, will plug it in an check it with VCDS tomorrow and hopefully program it!

I have done that swap many times and every time everything works without any VCDS coding, apart from the key fobs that have to be paired and that is not too difficult.

I think that you will also find that everything works apart from the remote keys.

Steve B
 
Good idea that, nice one ;)
My VAG-COM cable turned up today :) I cleared the old EGR error light.
I scanned the CCU and it listed a loaaaad of errors. I cleared them and one keeps coming back, saying that the module is faulty :(

It might be worth taking the CCU apart and trying to see if it has any dry joints, ive fixed 2 Q models like this, depends how competant you are with a soldering iron.
 
Thanks, I thought about having a crack at it. I'm an electrical controls tech by trade, so reasonably handy with an iron.

I would leave well enough alone unless you have any symptoms. I have had a few A2s with that warning and no symptoms whatsoever.

Steve B
 
Cheers for the warning, but I've taken the Brave Pills.

The EGR warning isn't related to the CCU is it? I thought the EGR was part of the Engine ECU.

My cccu reports a unit fault with VCDS, and the electric window control on the passenger side doesn't work.
I'll swap them over tomorrow and hopefully the ebay one will show no faults.
 
Last edited:
Well, I plugged in the ebay one and it set the alarm off. VCDS says.............

MY UNIT

Tuesday,01,October,2013,08:19:15:40973
VCDS Version: Release 12.12.0

Address 46: Central Conv. Labels: None
Control Module Part Number: 8Z0 959 433 Q
Component and/or Version: Komfortgerát T1D 0614
Software Coding: 06858
Work Shop Code: WSC 00000
Additional Info: 8Z2959802 Tõrsteuer.FS BRM 0001
Additional Info: 8Z2959801 Tõrsteuer.BF BRM 0001
VCID: 54A79AD2A45B42BE60B-4B36
1 Fault Found:

01330 - Central Control Module for Central Convenience (J393)
37-00 - Faulty


------------------------------------------------------------------
EBAY UNIT



Tuesday,01,October,2013,08:16:19:40973
VCDS Version: Release 12.12.0

Address 46: Central Conv. Labels: None
Control Module Part Number: 8Z0 959 433 Q
Component and/or Version: Komfortgerát T1D 0614
Software Coding: 06858
Work Shop Code: WSC 00000
Additional Info: 8Z2959802 Tõrsteuer.FS BRM 0001
Additional Info: 8Z2959801 Tõrsteuer.BF BRM 0001
VCID: 54A79AD2A45B42BE60B-4B36
3 Faults Found:

01330 - Central Control Module for Central Convenience (J393)
37-00 - Faulty
01374 - Alarm triggered by Terminal 15
35-00 - -
01371 - Alarm triggered by Door Contact Switch; Driver's Side
35-00 - -

I clear the codes and these keep coming back.
Return that then, doh.
Any ideas before I return it?
 
Last edited:
Back
Top