I purchased the V/W 1k0 051 444 ipod fitting kit from one of the members on here over the new year. I've got a symphony unit fitted in the car with the 6cd changer built in. I have only just managed to get the unit out to look at it. I'm confused. The fitting instructions aren't very clear. The unit comes with 2 looms but I'm not sure how it fits. One loom definitely won't fit so I presume its the other loom. The wiring on the unit has 3 separate plugs one above each other and I think the loom goes into the top plug socket on the unit. But the adaptor loom has 3 coloured plugs yellow green and blue connected together with only wiring coming from the blue plug but the unit loom has one black plug taking up the space where I think the coloured plugs go. Do I have to remove the wiring terminals from the black plug on the unit and put them into the adaptor loom coloured plugs and then dispense with the original plug. Also there are 2 brown wires on the adaptor loom, one has a terminal and the other a black plug/ block, where do they go? If this is the case with putting the wires into the adaptor plug then I have borrowed some terminal tools already. I just need some clarity before proceeding. Thanks.