Was it a red A2 ?.Yes its been done, with at least one in the UK
200 BHP 1.8T a2
I could not find a thread on this one here, but some dude in Germany Built a 1.8T audi A2 with a donor body, engine etc, with TUV on it. (maybe Erstens has posted it once though) check the forum in german, but the pictures say more than thousand words. i came across it while searching if...www.a2oc.net
Ive brough a 05 plate very dark metallic blue (looks like black from a distance ) 1.6 fsi to do the 20 valve turbo conversion with .
So anybody that can guide me with advice in what i need to build a missile of a Audi A2 ,then im all ears ...
You'll have to pay a considerable amount to someone to work out the interconnection schematic, before you pay them to make the loom. I suspect making the looms will be the least cost.Ill pay other people to do my wiring loom .
I would say, you'd need about 50 hours and minimum £5000 to complete the whole change properly, that excluding the uprated suspension, stronger brake system, probably a votex kit balance the heavier engine, etc etc. I'd say all in all around £10.000. Give or take a bit.
How far have you got ?.I am doing the same to 1 of my A2’s.
Looking to fit an 1.8 turbo engine
God you lot are all doom and gloom merchants ..
Im still going a head with it
Please share which parts you have so far sourced .Sources g all the parts
You ?
Please share which parts you have so far sourced .
I have so far brought the doner car ..
A cobalt blue 05 plate 1.6 fsi .
Looking to source a low milage BAM engine .