Load net in place of rear seat backs

[A2Dreamer]

I often run without the rear seats in for a bit of weight saving, but am not keen on being whacked on the back of the head by whatever's in the boot in the unfortunate event of a shunt...

So, butchering a standard load cover and using some webbing and my mum's old sewing machine, I came up with this.

I removed the guts from the load cover, cut the webbing to length and hot melt glued everything together to hold it all in place whilst I worked out the intricacies of the old sewing machine...

Not going to win any sewing bees, but seems to have worked pretty well. I need to do something to keep the ends of the load cover extended and pushed into the slots as it's lost all its springs with the internals removed.

 

[audifan]

Or there was the genuine Audi net partition, if you could find one...

net partition between cab and load compartment Audi A2 (A2) 2003 year Audi EUROPA 861010

net partition between cab and load compartment Audi A2 (A2) 2003 year Audi EUROPA 861010 spare parts

audi.7zap.com

 

[A2Dreamer]

That's interesting, never knew that even existed...

Looks like that goes directly behind the driver's seat, mine is just behind the rear seats and connected to the tie down rings by old climbing carabiners....

 

[audifan]

Do I remember correctly that @A2Steve mentioned one before?