Removing lower sill corners

Alan_uk

A2OC Donor
Hi. Have done a search and been through the How To's index https://www.a2oc.net/community/inde...some-of-the-how-tos-and-useful-threads.27103/ but no luck.

I've removed the rear wheel arch liners for another job and thought I would repaint the rear sill corners as being flared they get a lot of wear and tear.

To remove the liner I removed 3 screws that go into each corner. I can now disengage the corners from the rear wheel arch but it's not coming free from the lower shirt. Are there any screws I'm missing or do I have to remove the lower skirt?

Thanks
 
Yes, there's one hidden under the cover for the kick panel of the side skirt. The long strip part that runs in line with the sideskirt. Be aware that on removal the clips almost always break and the part is no longer available from Audi.
 
Thanks Spike and Steve for a quick response. I suspected there was a screw - good job I didn't force.

Yes, I found the guide to the removing the skirt and the issue of the clips breaking on the upper trim.

So it's either paint in-situ or see if Audi Tradition has the upper trim.
 
Back
Top