audiquattro59
Member
My 1.4 petrol has a sluggish throttle response. Push down the peddle & there is a delay before the engine revs up so difficult to maintain say 2000 rpm. Any ideas ? please?
Yes there are iOS supported options though run a scan with your existing scan tool. Which obd tool do you have?Ok, I only have IOS devices. Is anything available IOS?
MAF'S used to do this, you could try unplugging and seeing if the default open circuit state is better than potentially duff info currently been supplied! This would put the engine light on thou so be warned if you cant clear fault codes yourself
MAF'S used to do this, you could try unplugging and seeing if the default open circuit state is better than potentially duff info currently been supplied! This would put the engine light on thou so be warned if you cant clear fault codes yourself
I think the same would apply Ecu will use a default map if it can’t see the map sensor
Sent from my iPhone using Tapatalk
I look very stupid now....:0(
The map is mounted to the drivers end of the inlet manifold if memory serves. Attaches with 2 small torx screws
He can always clear the code using obd11
Sent from my iPhone using Tapatalk
Rightly so too! more than happy if i am ever off the mark to corrected, especially saving a wild goose chase!!Not at all, just saving him searching for it, the map sensor is cam belt side with the plug facing up by the way
Sent from my iPhone using Tapatalk
I have a Carista Bluetooth unit.Yes there are iOS supported options though run a scan with your existing scan tool. Which obd tool do you have?