Spacers drawing

[ian_2702]

Hi, I was wondering if anyone had a technical drawing of a2 wheel spacers? I have access to a lathe and wanted a go at making some

 

[spike]

Can't be too difficult to draw your own. The 5 wheel bolts are on the standard 100mm pitch circle diameter and you can take the inner, outer and spiggot dia dimensions from your existing hub.

Cheers Spike

 

[bretti_kivi]

bear in mind the base of the spigot is not a square edge. Not sure of the radius, but would expect it to be of the order of 3-4mm, and you really should get it right for the wheels to not wobble at speed.

- Bret