Steering Angle Sensor Calibration

J

jake79

Member
Hello all

How I make Steering Angle Sensor Calibration to my Audi A2(1.4tdi) with
Vag-com?

Thanks
 
You will need to use a login number to do the basic settings, but if you don't know it, then I'd leave it to someone who does as you can easily mess things up if you're a VCDS novice, resulting in a car without ABS!!

Cheers,

Mike
 
Skipton01 said:
You will need to use a login number to do the basic settings, but if you don't know it, then I'd leave it to someone who does as you can easily mess things up if you're a VCDS novice, resulting in a car without ABS!!

Cheers,

Mike
Click to expand...

Can You tell me how I can find the right "numbers"?

Sunday,07,February,2010,12:54:34:51929

Chassis Type: 8Z - Audi A2
Scan: 01 02 03 08 15 16 17 37 45 46 56 57 75 76 77

VIN: WAUZZZ8Z35NXXXXXX Mileage: 100630km/62528miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: Redir Fail!
Part No: 045 906 019 BA
Component: 1,4l R3 EDC 0000SG 5265
Coding: 00002
Shop #: WSC 02138
WAUZZZ8Z35N004877 AUZ7Z0D2647461

No fault code found.
Readiness: 0 0 0 0 0

-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: Redir Fail!
Part No: 8Z0 907 379 D
Component: ESP FRONT MK60 0101
Coding: 0007303
Shop #: WSC 00000 785 00200

2 Faults Found:
00778 - Steering Angle Sensor (G85)
008 - Implausible Signal
00778 - Steering Angle Sensor (G85)
003 - Mechanical Failure
 
Last edited:
You must log in or register to reply here.
Back
Top