Sunroof Opening With Key
- Thread starter Kleynie
- Start date
Kleynie
A2OC Donor
That's helpful, thanks, I'll do some looking into it and report back.
steaman
A2OC Donor
I have it installed, works perfect.
This is from the manual:
Function 1 - Main Switch - Workshop and Diagnostics ( 0=OFF / *1=ON / 2=NO HAZARDS )
The module can quickly and easily be enabled and disabled using this function. It acts like a master switch. When disabled, the module becomes completely inactive and behaves as if it was not installed.
Setting 0 disables the entire module while keeping all other function settings intact. This allows turning the module off and back on without the need to reconfigure all of the other user configurable settings.
Setting 2 disables blinking of the hazards during remote operation.
Function 2 - Automatic door locks ( *0=OFF / 1=CLOSE / 2=CLOSE&OPEN 1 / 3=CLOSE&OPEN 2 )
This function has three settings and will either lock all doors once the car starts moving (setting 1) or also unlock the doors when the key is removed from the ignition lock (setting 2). It can also be set to already unlock the doors in the moment the ignition is turned off (setting 3).
Function 3 - Remote windows operation ( 0=OFF / *1=ON / 2=AUTO1 / 3=AUTO2 )
This function allows window and sunroof operation with the original remote using the RF signal. This allows for a much greater convenience than the factory function via key in the door lock.
This is from the manual:
Function 1 - Main Switch - Workshop and Diagnostics ( 0=OFF / *1=ON / 2=NO HAZARDS )
The module can quickly and easily be enabled and disabled using this function. It acts like a master switch. When disabled, the module becomes completely inactive and behaves as if it was not installed.
Setting 0 disables the entire module while keeping all other function settings intact. This allows turning the module off and back on without the need to reconfigure all of the other user configurable settings.
Setting 2 disables blinking of the hazards during remote operation.
Function 2 - Automatic door locks ( *0=OFF / 1=CLOSE / 2=CLOSE&OPEN 1 / 3=CLOSE&OPEN 2 )
This function has three settings and will either lock all doors once the car starts moving (setting 1) or also unlock the doors when the key is removed from the ignition lock (setting 2). It can also be set to already unlock the doors in the moment the ignition is turned off (setting 3).
Function 3 - Remote windows operation ( 0=OFF / *1=ON / 2=AUTO1 / 3=AUTO2 )
This function allows window and sunroof operation with the original remote using the RF signal. This allows for a much greater convenience than the factory function via key in the door lock.
- Tap UNLOCK on the remote 2x (in 1 sec intervals) to open all windows.
- Tap LOCK on the remote 2x (in 1 sec intervals) to close all windows.
- Tap LOCK on the remote 3x (in 1 sec intervals) to close windows and sunroof.
Tapping any button will interrupt the current operation immediately.
Setting 2 enables AUTO-CLOSE for all windows: Every time the car is locked by remote, all windows and sunroof close automatically.
Setting 3 enables AUTO-CLOSE for windows and sunroof: Every time the car is locked by remote, all windows and sunroof close automatically.
WARNING: USE THIS FUNCTION AND PARTICULARLY SETTINGS 2 and 3 WITH EXTRA CAUTION! MAKE SURE THAT EVERYTHING IS CLEAR BEFORE LOCKING THE VEHICLE! NEVER LEAVE THIS FUNCTION ENABLED WHEN GIVING THE KEY TO SOMEONE ELSE! WE CAN UNDER NO CIRCUMSTANCES BE HELD LIABLE FOR ANY CONSEQUENCES OF USING THIS (OR ANY OTHER) FEATURE OF THIS MODULE!
Function 4 - Gas cap remote ( 0=OFF / *1=ON )
This function enables remote gas cap unlocking. When enabled and the car is unlocked, a quick double-tap on the trunk button on the remote will pop open the gas tank lid.
Function 5 - All-Windows comfort operation ( 0=OFF / *1=ON / 2=DELAY )
This function enables a comfort open/close mode for all windows using the driver's window switch. Hold the window switch in the one-touch position (up or down) for more than 2 sec. to raise or lower all 4 windows. If settting 2 is active, this function stays active for about 1 min. after the ignition was turned off and allows raising/lowering all windows (via driver's window switch) even after a door was opened.
