Today I.....

I've tried sanding and lacqure and made a right old mess, takes ages as well.
Some elbow grease with cheap turtle Wax cutting compound, t-cut and then polish, nothing fancy.
Use varying degrees of super fine sandpaper if yours are yellow to start with.
There are still visible scratches in my lenses so I could do better but from a distance there fine.
👍🏻
IMG_20220520_160929.jpg
 
I've tried sanding and lacqure and made a right old mess, takes ages as well.
Some elbow grease with cheap turtle Wax cutting compound, t-cut and then polish, nothing fancy.
Use varying degrees of super fine sandpaper if yours are yellow to start with.
There are still visible scratches in my lenses so I could do better but from a distance there fine.
👍🏻View attachment 94821
Yes the wet 'n' dry, cutting compund and polish was exactly the process I used on the set I did not too long ago but I thought you must have gone the lacquer route or done something different as they look so good but it might just be the photo with the sunlight helping but they certainly do look bright and clear 👌

Fortunately my own car headlights that are the original ones and haven't been refinished are still looking good atm although they are now nearly 19 years old but I'm sure they will need doing in the not too distant future.

Keep up the good work 👍
 
Yes the wet 'n' dry, cutting compund and polish was exactly the process I used on the set I did not too long ago but I thought you must have gone the lacquer route or done something different as they look so good but it might just be the photo with the sunlight helping but they certainly do look bright and clear 👌

Fortunately my own car headlights that are the original ones and haven't been refinished are still looking good atm although they are now nearly 19 years old but I'm sure they will need doing in the not too distant future.

Keep up the good work 👍
Follow the @audifan mothers route and you’ll be grand if they’ve not been fiddled with prior.
 
  • Like
Reactions: A2Z
Update: Checked for error codes, nothing logged…
I have a slight refrigerant leak in mine - the air con gradually gets less effective until it does nothing. Like you, there are no errors logged (which I find odd as I believe there's a pressure sensor in the system).

PS sorry for delay, thought I'd posted it the other day!
 
I have a slight refrigerant leak in mine - the air con gradually gets less effective until it does nothing. Like you, there are no errors logged (which I find odd as I believe there's a pressure sensor in the system).

PS sorry for delay, thought I'd posted it the other day!
Condensor is the most likely culprit in any A/C system
 
Drove to Euro Disney. Fully loaded with me, my wife, my nearly 4yo daughter and as much stuff as one can fit in an A2.
EFA8A700-4F34-4596-899D-396513D9531F.jpeg

CAC1E425-B6F3-4794-9719-4079985721B9.jpeg

50638922-142F-4CDA-AB72-1339B0F7C075.jpeg

I’m pleased to report L’ey performed without fault (I won’t lie, I’ve pretty much all the kit to re build her and my VCDS laptop and cable in the boot in case the auto box throws a wobbly!!) and I’m very hopeful of beating my best tank range. May even do it on a single tank 😊

02E7294A-D3A0-4802-AD72-54207D8B21A1.jpeg

FF1201A9-6FFB-4A3B-A4B9-E86A0AE7165C.jpeg
 
Back
Top