TT steering wheel fitting

Howey

Member
England
My TT wheel arrived today, very pleased with it!
However no bolts have been supplied for the airbag, can i used my existing ones from 4 spoke plastic one?
Cheers
Howey
 
maybe but I think they are meant to be captive screws, although I'm sure they will come out, just check the thread is the same in the old and new airbag
Paul
 
maybe but I think they are meant to be captive screws, although I'm sure they will come out, just check the thread is the same in the old and new airbag
Paul
Have since realised the wheel is missing the airbag securing plate hopefully seller will get back with a solution
 
Eventually the cradle plate has arrived from the seller but now have the headache that its missing one of the cradle to wheel securing screws these are quite a specialist bolt with spacer built in and a M5 thread. Also missing the securing bolts x2 for the airbag to cradle but these appear to be a M6 with T30 head so not too difficult to come by. Some ebay sellers are really hard work!!
 
IF they are the same as used on the A2 perhaps one of our breakers can help unless you can reuse any from your old plastic wheel.
 
For the airbag yes i could but not for the cradle as the A2 has not got a cradle/bracket bolted to the wheel sadly
 
May be worth checking to see if the part number is valid and can be sourced from a dealer. Scrap yard?
 
Many thanks for all help, have got a very similar bolt from a 3 spoke b5 passat wheel, sure i have some T30 m6 bolts at work so should be fitted soon!
 
Back
Top