VCDS scan results

[johnyfartbox]

Address 08: Auto HVAC Labels: None
Controller: 8Z0 820 043 F
Component: A2-KLIMAVOLLAUTOMAT 0514
VCID: 39059F973041
9 Faults Found:
00710 - Defroster Flap Positioning Motor (V107)
41-10 - Blocked or No Voltage - Intermittent
01272 - Positioning Motor for Central Flap (V70)
41-10 - Blocked or No Voltage - Intermittent
01271 - Positioning Motor for Temperature Flap (V68)
41-10 - Blocked or No Voltage - Intermittent
00716 - Air recirculation Flap Positioning Motor (V113)
41-10 - Blocked or No Voltage - Intermittent
00727 - Potentiometer in Positioning Motor for Defrost Flap (G135)
30-10 - Open or Short to Plus - Intermittent
00601 - Potentiometer On Positioning Motor for Central Flap (G112)
30-10 - Open or Short to Plus - Intermittent
00600 - Potentiometer On Positioning Motor for Temperature Flap (G92)
30-10 - Open or Short to Plus - Intermittent
00819 - High Pressure Sensor (G65)
29-10 - Short to Ground - Intermittent
01273 - Fresh Air Blower (V2)
17-10 - Control Difference - Intermittent


Also.

Address 56: Radio Labels: 8E0-035-1xx-56.LBL
Controller: 8Z0 035 195 G
Component: symphony II NP2 0152
Coding: 00201
Shop #: WSC 00000
VCID: 40F3F273539B
1 Fault Found:
00879 - Connection to Speaker Front Right
36-00 - Open Circuit

Asking for a friend.

 

[simufly]

Yes the HVAC usually throws up a lot of errors, mostly intermittent
Of you have full VCDS you can function the motors and flaps through the range. Do it a couple of times, clear all the faults and try another scan
The radio, does it work Ok? If so clear the fault and get on with enjoying the A2!