Volico Paint, Advice Please

PlasticMac

PlasticMac

Admin Team
United-Kingdom
Hi, I want to improve the look of the steering column trims on the TT. Swing grey is close enough.
Do I need a primer as well as the finish? I'll approach @Rickmeister unless anyone has some to spare ... 🤞
Mac.
 
Mac on those items you should be just fine without the primer. The paint should cover nicely. Also do not think that you would benefit from using the sealer after the paint.
 
Evening Mac,

Having used this product quite a few times now I can absolutely concur with Graham above.

The very first time I used Volico (Twist) was for the fuse cover early on in the Project OEM thread. No primer or sealant used and it’s is still perfect over 2 years later. That very item gets a frequent application of AutoGlym Plastic and Vinyl product whilst detailing the interior. No discolouring, peeling or any other issue what so ever.

I’ve used this very same method on many interior items now.

The Soul Black product is just as good which you can see on the Rear Cup Holder restoration thread.

Personally I’ve not used their Swing product but cannot see why it would be any different to the above 2 colours.

I know it’s not the cheapest of paints but it is worth it. The only advice I can give is purchase more then you think you’ll need. It applies nicely and covers well for the size of the tin but for the very best depth of colour then go for more light coats than you would normally think necessary.

Kind regards,

Tom
 
2work said:
Evening Mac,

Having used this product quite a few times now I can absolutely concur with Graham above.

The very first time I used Volico (Twist) was for the fuse cover early on in the Project OEM thread. No primer or sealant used and it’s is still perfect over 2 years later. That very item gets a frequent application of AutoGlym Plastic and Vinyl product whilst detailing the interior. No discolouring, peeling or any other issue what so ever.

I’ve used this very same method on many interior items now.

The Soul Black product is just as good which you can see on the Rear Cup Holder restoration thread.

Personally I’ve not used their Swing product but cannot see why it would be any different to the above 2 colours.

I know it’s not the cheapest of paints but it is worth it. The only advice I can give is purchase more then you think you’ll need. It applies nicely and covers well for the size of the tin but for the very best depth of colour then go for more light coats than you would normally think necessary.

Kind regards,

Tom
Click to expand...
Thanks Graham and Tom. I've messaged Rick.
Mac.
 
Hi Mac, the car ive just bought looks like Cruella de Vil has been finger tapping all over it. Do you just spray the volico over the broken soft touch material, or do you have to chemically/mechanically remove the old stuff first? And if so, how do you do that?
 
james.mckenzie said:
Hi Mac, the car ive just bought looks like Cruella de Vil has been finger tapping all over it. Do you just spray the volico over the broken soft touch material, or do you have to chemically/mechanically remove the old stuff first? And if so, how do you do that?
Click to expand...
I'm ashamed to admit that I didn't get round to doing it.
I'm sure you'll get good advice from others, who are more industrious than I.
Mac.
 
james.mckenzie said:
Hi Mac, the car ive just bought looks like Cruella de Vil has been finger tapping all over it. Do you just spray the volico over the broken soft touch material, or do you have to chemically/mechanically remove the old stuff first? And if so, how do you do that?
Click to expand...
Hello James,

I’ve painted various internal trim panels with the Volico paint. The preparation for beautiful looking results is key. If you’re looking to recover work away soft would then it’s definitely best to remove what remains before applying this coats of Volico.

There are ma y way to remove the soft touch coating but personally I choose 2 options.

1. If the item is small enough to fit in the sink then just tap-hot soapy water works well. Passing over the item with a non-scratch sponge has been perfect in the past. Any stubborn areas get a drop of alcohol to soften the original paint then use the same non-scratch sponge.

2. Larger item get the same treatment but done outside. As it’s more difficult to soak them in hot water I generally empty more alcohol in the process.

Point to note, try nit to use any aggressive solutions like nail varnish remover as it can take some of the black pigment out of the plastic. Best to use alcohol.

So far I’ve only used Soul and Twist. In my personal experience, the Twist paint is an absolutely perfect colour match out of the tin. Soul paint comes out a little lighter and almost looks to the untrained eye as a dark Swing colour. This is the correct colour and the existing aged Soul paint has darkened over time. Fresh Soul Volico paint takes a few months to darken during your periodical o terror detailing.

Hope this helps out.

Kind regards,

Tom
 
2work said:
Hello James,

I’ve painted various internal trim panels with the Volico paint. The preparation for beautiful looking results is key. If you’re looking to recover work away soft would then it’s definitely best to remove what remains before applying this coats of Volico.

There are ma y way to remove the soft touch coating but personally I choose 2 options.

1. If the item is small enough to fit in the sink then just tap-hot soapy water works well. Passing over the item with a non-scratch sponge has been perfect in the past. Any stubborn areas get a drop of alcohol to soften the original paint then use the same non-scratch sponge.

2. Larger item get the same treatment but done outside. As it’s more difficult to soak them in hot water I generally empty more alcohol in the process.

Point to note, try nit to use any aggressive solutions like nail varnish remover as it can take some of the black pigment out of the plastic. Best to use alcohol.

So far I’ve only used Soul and Twist. In my personal experience, the Twist paint is an absolutely perfect colour match out of the tin. Soul paint comes out a little lighter and almost looks to the untrained eye as a dark Swing colour. This is the correct colour and the existing aged Soul paint has darkened over time. Fresh Soul Volico paint takes a few months to darken during your periodical o terror detailing.

Hope this helps out.

Kind regards,

Tom
Click to expand...
Thanks so much Tom. I just need to work out if it is Soul or Onyx interior now.

Best,

James
 
james.mckenzie said:
Thanks so much Tom. I just need to work out if it is Soul or Onyx interior now.

Best,

James
Click to expand...
Hello James,

The Volico products specific for Audi are as follows:

  • Platinum - Light Grey
  • Soul - Black
  • Swing - Dark Grey
  • Twist - Beige
If you’re able to add a picture of your interior then I’m quite sure the community can advise accordingly.

Kind regards,

Tom
 
Here is a picture from years ago showing the colours...


1715178951682.jpeg
 
Its most definitely this colour. And ive included a picture of my interior. Service book sticker says interior colour is LY7W/LY7W and NOG/YH

1715240827285.png


1715240794483.png
 
You must log in or register to reply here.
Back
Top