What other Audi wheels will fit A2?

robbo

robbo

Member
I have seen several listings for original Audi rims on E-Bay, but not sure which other Audi rims will fit on the A2. Anyone know if A3 or A4 rims will fit? I have seen some A4 rims with different 5 hole spacing so I know those will not fit. I tried searching the posts but could not find anything. Thanks.
 
I was thinking of a set of these myself..

236.jpg


BTW PCD 100
 
Last edited:
pamanal21

Robbo Has Just Beaten Me To It!
Hi All,
I Also Need Your Help & Advice On The Following,(asap Please).
A Quick Ref Re My Car,a2 1.4 Petrol Y Reg Fitted With 15" Alloys
Tyres Are 175/60 R15,wheel Bolts Are 14mm Dia X 27mmthread Length.
1/ I'm Thinking Of Investing In 17"alloys For Mya2(off Net/e Bay)
I See That On E Bay Generally ,a2 Wheel Bolt Figures Are Quoted As Either 100 Or 112, Of What Spec Is This? When Sorted Onto Ques 2.
2/my Current 15"wheels Are Stamped Wth Et 34 Ref As Offset Figure.
Most Of Ebay 17" Alloys Have An Off-set Figure Of 35 Quoted. Would This Figure Be Acceptable / Or Detrimental? Will It Alter The Geometry / Steering Etc?
3/ Next, Tyre Widths. Most Are Quoted As 7.5j Up To 8j. What Is The Maximum Width Allowed On Standard A2 Car (no Mods)?
4/ 17" Alloys Can Also Be Purchased With Tyres Fitted On Them. The Size Most Quoted Is 225/45 X R17. Are These Ok For An A2? I Also Know You Can Fit The Following Sizes - 205/40 X 17, 215/45 X 17. My Question Is, What Size Tyres Are Best / Correct And Safest. Also What Is The Best Brand Name?
5/ I've Has My A2 Since Sep 05. It's A Great Car / Quality And Drive Also. Only Downside So Far Is: The Car Is Affected At Speed By Side Wind / Drifting, As When Passing Arctics Etc. As I Ike My Car To Feel Rock Solid On The Road At All Times I Am Hoping The 17" Alloys / Tyres Will Help To Impove The Said Problem.
6/ All Your Thoughts / Answers On Above Would Be Greatfully Recieved And Perhaps Could Be Stored For Future Refernce For All. This Is Assuming They Are Not Already On File (i Am A Novice At His Don't Forget).
Thanks Again And Happy New Year To All, Alan
 
Guys, you need PCD 100: offset as your current wheels, my sport 17" are 38, the smaller the offset the further away from the hub and calipers so don't go less that you have now, the bore is around 57mm, pamnal21, steer away from the 17" if you value your spine or at least use a 45 profile tyre, my 40's are rock hard hence the change to the 16" A3SE rims (these by the way need a spacer, I have a 5mm set on at the mo but am changing to a 10mm set soon, I also made the mistake of using a multi fit set, DON'T, it gives severe vibration at 65-75mph, use a proper set, they cost more but are far better units)
 
Love the BoneRide!

Hi guys, I purchased my 17" RS8 style rims and put pirelli p7000's on as my tire. They are ultra lo-profile and look great....and for all older generation pondering rim protection...there isnt any. Infact the rim is the first thing the kerb would hit :(. However no kerbs or markings as yet. If anyone wants me to post pics I will do! I scoured A2oc for tires and no-one even mentioned the pirelli's?Am I a pioneer? Anyways Happy NewYear and Good Night!
 
Primea2 said:
Hi guys, I purchased my 17" RS8 style rims and put pirelli p7000's on as my tire. They are ultra lo-profile and look great....and for all older generation pondering rim protection...there isnt any. Infact the rim is the first thing the kerb would hit :(. However no kerbs or markings as yet. If anyone wants me to post pics I will do! I scoured A2oc for tires and no-one even mentioned the pirelli's?Am I a pioneer? Anyways Happy NewYear and Good Night!
Click to expand...
We are always interested in seeing pics of everyones A2 especially with any new mods/wheels ........Send them pics over .......
Talking off Pirelli's what about Dubbsy's A2 http://www.a2oc.net/gallery/showimage.php?i=170&catid=member&imageuser=2331
 
Last edited:
You must log in or register to reply here.
Back
Top