Wheel centre size on QT alloys?

Birchall

Dick Chown Award 2016
I am looking to buy some wheel centres for my QT alloys, does anyone know what size centres fit please?

Cheers
Steve B
 
Thank you so much for trying, but the QT wheel is not included on those lists (it is quite a rare wheel that is genuine Audi but not normally on the A2).

There are a few A2 owners running QTs, so hopefully one of them have bought wheel centres for them, but I won't hold my breath.

Thank you anyway

Steve B
 
Hi Steve - bought some a long time ago and I think they are 60mm if I remember - sure if you measure the hole in the wheel you can confirm - if not let me know and I will go to lockup and measure - nice to see you back
Cheers Dave
 
Thanks Dave

nice to be back!!

I am hopeless as measuring wheel centres. But Iwill check in the morning.

thank you
Steve B
 
I believe the ones I purchased (dark grey with chrome rings) were 58 mm. I also had to remove the metal spring rings from the back. Once on they hold really tight and never lost any. Cheers mike
 
Hi Steve - bought some a long time ago and I think they are 60mm if I remember - sure if you measure the hole in the wheel you can confirm - if not let me know and I will go to lockup and measure - nice to see you back
Cheers Dave
Thanks Dave

bought a set rom eBay for £7.95 to try.
They fit a bit tight but they fit and look ok.

Cheers
Steve B

5E951FA7-342B-479D-99C6-01528001C4EF.jpeg
 
Last edited:
I bought a set of 60mm ones and they were very tight but fitted.
I suspect that you were right too 58mm would fit too but I am not sure. But the 60mm are on.

cheers
Steve B
 
Back
Top