Dissconect the pipe at the Y piece, where it split into the two jets, see if flow is better.Hi all, the washer bottle has enough fluid inside, but something isn't right, as even pointing the nozzles highest, the spary still only reaches under the wiper blade. Any advice? Cheers
I'll have a look, thanks Mac.Dissconect the pipe at the Y piece, where it split into the two jets, see if flow is better.
If not pump end gunked up, so low pressure perhaps?
I think the tanks the place to start then.
Mac.
Sounds like it, I'll have ask someone to see where it's been split, cheers.I had this problem, pipe split. Most of my screen wash was cleaning the engine bay.