A
a2-1436
Guest
A word of caution when removing the wiper arm securing nuts. Make sure you hav filled the drain hole with rag or paper. If not the nuts have a nasty habit of falling dowm the tube & hide somewhere invisible & in accessible under the engine.
I got mine back by removing the under engine noise insulation (13 screws & 2 bolts)
The good news was that I found that the 3 machine screws that hold the pre-heater exhaust outlet were badly rusted. I was able to remove them just before they rusted up solidly & would need drilling out
Peter
A2-1436
I got mine back by removing the under engine noise insulation (13 screws & 2 bolts)
The good news was that I found that the 3 machine screws that hold the pre-heater exhaust outlet were badly rusted. I was able to remove them just before they rusted up solidly & would need drilling out
Peter
A2-1436