Good day all I wanted to help out the forum , so I've done a write up for the Jdd conversion on the 1.4 tdi
Let's begin the mods to the Jdd box
First you will need to remove two clunks of material one on the side gear mount
The next chunk is the lower dog bone mount .
Next you will need two spacers .
I used the old engine mount like this they are 6 mm thick and 7 mm thick . 10mm holes.
Next I would renew part 02a 141 180a remove 3 m8 splines.
Being careful not to damage the seal on the splines I used a small offcut plastic rolled into a tube placed over the gearbox splines .
Let's begin the mods to the Jdd box
First you will need to remove two clunks of material one on the side gear mount
The next chunk is the lower dog bone mount .
Next you will need two spacers .
I used the old engine mount like this they are 6 mm thick and 7 mm thick . 10mm holes.
Next I would renew part 02a 141 180a remove 3 m8 splines.
Being careful not to damage the seal on the splines I used a small offcut plastic rolled into a tube placed over the gearbox splines .