Alan_uk
A2OC Donor
Can anyone help with a part no. please. Local garage say they can't find the no. but that maybe due to it not being a purchasable item.
It's a TDi 75 and I have a space saver so the battery is covered by the L shaped plate with the space saver fixing point. At the bottom of the L shaped plate are two bolts that go into the plastic battery tray. These bolts screw into a brass insert. When I took one of the bolts out it brought out the insert as it was cross threaded (presumably on the assembly line).
Diagram and photo attached though this is without an L shaped plate but still has the two lower bolts.
Normally I might be happy to have just the one lower bolt but the L shaped plate is twisted and the corner is digging into the side of the battery so it could cause a crack.
I intend to reinsert using epoxy glue.
It's a TDi 75 and I have a space saver so the battery is covered by the L shaped plate with the space saver fixing point. At the bottom of the L shaped plate are two bolts that go into the plastic battery tray. These bolts screw into a brass insert. When I took one of the bolts out it brought out the insert as it was cross threaded (presumably on the assembly line).
Diagram and photo attached though this is without an L shaped plate but still has the two lower bolts.
Normally I might be happy to have just the one lower bolt but the L shaped plate is twisted and the corner is digging into the side of the battery so it could cause a crack.
I intend to reinsert using epoxy glue.