front brake pads

Hi Cammy. Can you maybe put the details of the kit you used on here?

Congratulations. Sorry I couldn’t help.


Sent from my iPhone using Tapatalk
 
hi guys,

i have another problem at hand.... when i tried to remove rear left bleed nipple it snapped off. any ideas what to do to get this fixed? there is no fluid leaking from the nipple thankfully as its still locked in place. however, i know this needs to be fixed as i want to bleed the brakes properly. can i still bleed the brakes if i get the rear right side off, meaning only 3 sides will be bled?

this is more hassle than its worth! probably best to leave this to the professionals :(

cammy
 
Pinkythelabrat said:
Hi Cammy. Can you maybe put the details of the kit you used on here?

Congratulations. Sorry I couldn’t help.


Sent from my iPhone using Tapatalk
Click to expand...

you were plenty of help alex :) i thought i got the hard bit out of the way when i stripped the thread only to break off a bleed nipple on the rear! i guess bad things come in 3's so whats next.....car crash??? lol

as for the kit here it is....
http://www.ebay.co.uk/itm/New-15-Piece-Thread-Repair-Insert-Kit-M9-x-1-25-x-13-5mm-Helicoil-Compatible/201908753285?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

cammy
 
I think now that you’ve done this for the first time next time will be lots easier...

I’ve done brakes on my old 1960’s American cars years ago but I always had other cars to drive whilst one was on blocks getting worked on...

I’ve dont think I can handle the stress of getting car reassembled in time to do things like drive to work or pickup the kids after school but I’m getting there slowly...

I’m learning so much on your thread here so might have a go on my brakes soon...
 
You must log in or register to reply here.
Back
Top