A little lean is part of the a2 make up if your travelling mainly on country roads be careful you don’t make it so stiff you could end up with a bone jarring ride ..Looking at getting some lowering springs as I commute on country lanes and the lean when going around bends can get slightly annoying. Will Skoda fabia h&r springs fit the a2?
A little lean is part of the a2 make up if your travelling mainly on country roads be careful you don’t make it so stiff you could end up with a bone jarring ride ..
Thanks, replaced dog bone mount about 6 months ago so that’s checked off the list with all of the track rod ends, wishbones, droplinks, etcYup its all about what you want. I had pro sport coilovers on my car for around 2 years and eventually got tired of the jarring ride quality. The handling though was really good - so i had to decide to compromise on handling for ride quality. Eventually went for Monroe sports dampers and weitec 30mm drop springs.
Another thing that improved the handling was replacing the dog bone mount after 15 years of wear and tear. That made as much difference to comfort than the replacement of the coilovers as it was completely shot.
Yes they will, but you’d be far better off buying a set of Jom blueline coilovers instead. At less than £200 delivered they are far smoother than springs on the A2 and the handling is superb. Unless your current shocks are in superb condition and designed for lowering springs then they will need replacing too and the coilovers will work out cheaper overall.
Yes they will, but you’d be far better off buying a set of Jom blueline coilovers instead. At less than £200 delivered they are far smoother than springs on the A2 and the handling is superb. Unless your current shocks are in superb condition and designed for lowering springs then they will need replacing too and the coilovers will work out cheaper overall.
You want to fit polo 6nSteve,
I’m looking to replace my shocks this sounds tempting.
What about the top strut bearing on the front will standard ones be ok
Steve,
I’m looking to replace my shocks this sounds tempting.
What about the top strut bearing on the front will standard ones be ok
Can you give us more information or a link to this.You want to fit polo 6n View attachment 61863 items they are a beefed up version straight swap they have been mentioned many times before on here part number above ..?
Google part number that will give you list of suppliers and best price ...? if you read the post pict it tells you city gate ?Can you give us more information or a link to this.
Many Thanks