Hi all,
My A2 show many warning lights (Christmas tree inside ), I get : EPC, Red light brake blinking, ABS and ESP.
Engine is flanged at 4000rpm, I have cleaned up the throttle body and I have sprayed WD40 on many electrical connectors.
On vagcom I got these errors :
5 Faults Found:
16785 - EGR System: Insufficient Flow
P0401 - 35-00 - -
17428 - Fuel Pressure Regulation Control Range Exceeded
P1020 - 35-10 - - - Intermittent
17850 - Potentiometer for EGR (G212): Signal too High
P1442 - 35-00 - -
17987 - Throttle Actuator (J338): Adaptation Not Started
P1579 - 35-10 - - - Intermittent
17912 - Intake Air System: Leak Detected
P1504 - 35-00 - -
16785 - EGR System: Insufficient Flow
P0401 - 35-00 - -
17428 - Fuel Pressure Regulation Control Range Exceeded
P1020 - 35-10 - - - Intermittent
-------------------------------------------------------------------------------
Address 08: Auto HVAC
Controller: 8Z0 820 043 F
Component: A2-KLIMAVOLLAUTOMAT 0512
5 Faults Found:
01272 - Positioning Motor for Central Flap (V70)
41-10 - Blocked or No Voltage - Intermittent
01271 - Positioning Motor for Temperature Flap (V68)
41-10 - Blocked or No Voltage - Intermittent
00716 - Air recirculation Flap Positioning Motor (V113)
41-10 - Blocked or No Voltage - Intermittent
00601 - Potentiometer On Positioning Motor for Central Flap (G112)
30-10 - Open or Short to B+ - Intermittent
00600 - Potentiometer On Positioning Motor for Temperature Flap (G92)
30-10 - Open or Short to B+ - Intermittent
For EGR, I add a blank plate on it. I have also misfired on 2 cylinder.
I think all of these issues is from one cause but I don't know where. Could you help me ?
Thanks.
My A2 show many warning lights (Christmas tree inside ), I get : EPC, Red light brake blinking, ABS and ESP.
Engine is flanged at 4000rpm, I have cleaned up the throttle body and I have sprayed WD40 on many electrical connectors.
On vagcom I got these errors :
5 Faults Found:
16785 - EGR System: Insufficient Flow
P0401 - 35-00 - -
17428 - Fuel Pressure Regulation Control Range Exceeded
P1020 - 35-10 - - - Intermittent
17850 - Potentiometer for EGR (G212): Signal too High
P1442 - 35-00 - -
17987 - Throttle Actuator (J338): Adaptation Not Started
P1579 - 35-10 - - - Intermittent
17912 - Intake Air System: Leak Detected
P1504 - 35-00 - -
16785 - EGR System: Insufficient Flow
P0401 - 35-00 - -
17428 - Fuel Pressure Regulation Control Range Exceeded
P1020 - 35-10 - - - Intermittent
-------------------------------------------------------------------------------
Address 08: Auto HVAC
Controller: 8Z0 820 043 F
Component: A2-KLIMAVOLLAUTOMAT 0512
5 Faults Found:
01272 - Positioning Motor for Central Flap (V70)
41-10 - Blocked or No Voltage - Intermittent
01271 - Positioning Motor for Temperature Flap (V68)
41-10 - Blocked or No Voltage - Intermittent
00716 - Air recirculation Flap Positioning Motor (V113)
41-10 - Blocked or No Voltage - Intermittent
00601 - Potentiometer On Positioning Motor for Central Flap (G112)
30-10 - Open or Short to B+ - Intermittent
00600 - Potentiometer On Positioning Motor for Temperature Flap (G92)
30-10 - Open or Short to B+ - Intermittent
For EGR, I add a blank plate on it. I have also misfired on 2 cylinder.
I think all of these issues is from one cause but I don't know where. Could you help me ?
Thanks.